Compact MOOG underbridge inspection unit truck mounted for diagnostic and repair work on smaller bridges. This is the MBI 70-1 / S with perfect parameters of load capacity, lowering depth and footbridge reach. More...


The MBI 70-1 / S is located on the IVECO car chassis. You will especially appreciate the compact machine on smaller road bridges, where there is only limited space and limited load capacity. 2.5 meters on the road is enough to set up the machine. Bridge diagnostics is possible with a range of up to 7.5 meters below the bridge structure at a maximum lowering depth of 5.8 meters. The machine is equipped with an independent hydraulic drive and a 230V electric current generator.

We are trained directly at MOOG GmbH for safe and correct handling of the machine.

The technical solution meets all safety requirements for the design and operation of dedicated lifting equipment.



Manufacturer MOOG
Space required on bridge flat surface
Max. horizontal range (including extension) 7 (8,02) m
Footbridge size (including extension) 4,06 - 6,48 (7,5) x 1 m
Max. lowering depth 5,8 m
Width of platform 1 m
Space required on bridge 2,5 m
Max. load on platform 400 kg
Max. load on telescopic platform 200 kg
Maximum extension load capacity 100 kg
Rotation of platform 180°
Additional scaffolding floor height 1,1 m
Max. overbridging of sidewalk 1,86 m
Max. crossing of barrier 2,3 m
Total weight 6400 kg
Lenght 8,8 m
Width 2,5 m
Transit width 2,5 m
Transit height 3,8 m
Maximum working inclination 6 %
Maximum wind speed 12,5 m/s
Propulsion auto-motor
Operating temperature 0°C+

Request a machine

We care about your safety

The machines meet all strict safety requirements and our employees are regularly trained.

Working with us is fast

Within 15 minutes we will get you to the place under the bridge structure. Our PODMOSTOVKY can move on a bridge structure with an inspection bridge in the working position.

We will cover the bridge deck across its entire width

From the footbridge of our machines you can get to the entire surface of the bottom of the bridge deck, including the sloping sides - the machines have sufficient lateral reach and additional scaffolding for safe access to the side of the bridge deck.