The NISSAN CABSTAR DT25 platform is your lifesaver for high-altitude work in the city and light terrain thanks to the minimal dimensions of its chassis.
The DT25 aerial work platform on the NISSAN CABSTAR car chassis is suitable for assembly, construction, reconstruction and other high-altitude work that requires mobility and frequent relocation of the platforms.
The platform consists of a swivel on the chassis, a telescopic boom with an articulated telescope and a work basket. The maximum reach of the platform is 25 meters in height and 12 meters to the side.
The truck platform meets strict safety regulations and international standards. The stability of the platform is ensured by the subframe of the vehicle with four retractable supports that absorb the load of the platform.
|Space required on bridge||light terrain|
|Horizontal outreach||12 m|
|Max. lowering depth||5 m|
|Space required on bridge||4,17 m|
|Max. load on platform||230 kg|
|Total weight||3340 kg|
|Transit width||2,15 m|
|Transit height||2,25 m|
|Maximum working inclination|
|Maximum wind speed||12,5 m/s|
|Working height||25 m|
|Platform dimensions (extension)||1,4 m x 0,7 m|
|Dimensions at installation||6,7 m x 4,17 m|
The machines meet all strict safety requirements and our employees are regularly trained.
Within 15 minutes we will get you to the place under the bridge structure. Our PODMOSTOVKY can move on a bridge structure with an inspection bridge in the working position.
From the footbridge of our machines you can get to the entire surface of the bottom of the bridge deck, including the sloping sides - the machines have sufficient lateral reach and additional scaffolding for safe access to the side of the bridge deck.